Cleaning Instructions For Custom Blinds

Vertical Blinds

Vinyl and aluminum vanes can be cleaned with a damp cloth. Also, if a thin film of mild detergent is left on the vanes, it will eliminate static electricity. Fabric vanes require only periodic vacuuming. For soiled fabrics, we recommend the following process: let the soil dry and try to remove it from the fabric; if that does not work, gently scrub with warm water. If you are still unsuccessful, gently scrub with warm water and a mild detergent such as dishwashing liquid.

Horizontal Blinds

Aluminum blinds can be easily cleaned by extending them to their full length and closing the slats first in one direction and then in the other. Wipe the slats with a soft brush such as a Kiwi Kleener cloth or with your vacuum cleaner brush attachment. NOTE: Do not wash or use harsh abrasive cleaners on your wood blinds or shutters, the wood may absorb the water and warping will occur. Lemon oil or wood preservatives are a better choice.

Pleated Shades

Remove the pleated shade from the window, open the shade and lay it on a clean, flat surface such as a table or countertop. If the shade is dusty, gently vacuum it using an upholstery attachment. To clean fingerprints or soiled spots, we recommend using an aerosol spray foam upholstery or fabric cleaner such as Woolite or Scotchguard. Do not use strong detergents or spot removers. Spray the foam cleanser over the entire area to be cleaned and immediately wash the area with a clean damp sponge (back and forth in the direction parallel to the pleats in the fabric). If necessary, the entire shade may be cleaned in this fashion. Be careful not to crush or wrinkle the fabric and avoid rubbing since abrasive action may cause it to distort.